G-Force Customised Proposal

Please use this form to receive a G-Force proposal "customised" for your requirements. 
(you must complete our "Oily Waste Questionnaire" that follows below)

 
Company Name:
Full Address
(please include Country)
Contact Name:
Job Title:
E-mail address:
Telephone number
Fax number

Questionnaire

This information will allow G-Force to prepare your Budgetary Proposal
 

 
1) Treatment volumes  (click the appropriate box representing "on average" your waste volume
 
5 m³/hr x 10 hrs/day  = 50 m³/day = 18,250 m³/year
x 20 hrs/day = 100 m³/day = 36,500 m³/year
10 m³/hr x 10 hrs/day = 100 m³/day = 36,500 m³/year
x 20 hrs/day = 200 m³/day = 73,000 m³/year
15 m³/hr x 10 hrs/day = 150 m³/day = 54,750 m³/year
x 20 hrs/day = 300 m³/day = 109,000 m³/year
 
2) Source of oil to be treated (where is it coming from)?
 
 
 
 
3) General properties of source oil to be treated (by average representation of above volume)?
 
Viscosity Oil (as stored) avg. ambient temperature °C = cSt
Oil heated to    95 °C = cSt
 

Viscosity data not available  

   
 

 
Avg. composition of the source material % Oil   %
% Water   %
% Solids   %
 
Oil   S.G.
Water   S.G.
Solids   S.G.
 

Composition data not available  

   
 

 
4) Treated Oil - Water - Solids Specification

The feedstock (having the average composition as listed under No. 3 above) will be fed into G-Force's Oily Waste Treatment Plant. The treated material is to meet the following specification as defined below by the Company.
 
Component Specification Check the required specification below
 
Oil - BS&W < 0.5 % other, specified:
< 1.0 %
< 2.0 %
 
Water - Oil in Water < 10 mg/l other, specified:
< 50 mg/l
< 100 mg/l
< 1000 mg/l
< 10000 mg/l
 
Solids - Solids As seperated other, specified:
 
     
 

Specification data not available